Use of the inverse approach for the manufacture and decoration of food cans

G. A. Duffett; A. Forgas; L. Neamtu; H. Naceur; J. L. Batoz; Y. Q. Guo

doi:10.1063/1.2011309

Use of the inverse approach for the manufacture and decoration of food cans

G. A. Duffett^*
, A. Forgas
, L. Neamtu
, H. Naceur
, J. L. Batoz
, Y. Q. Guo

^*Autor/a de correspondencia de este trabajo

Producción científica: Capítulo del libro › Contribución a congreso/conferencia › revisión exhaustiva

1 Cita (Scopus)

Resumen

Innovation is a key objective in the metal packaging industry in order to produce new concepts, designs, shapes and printing. Simulation technology now allows both the can design as well as the manufacturing process to be carefully analysed before any physical prototypes or dies have been manufactured. These simulations are traditionally carried out using incremental simulation methodologies. However, much information may also be attained by using the inverse approach: the initial blank format for the can body as well as its lid may be optimised much faster, the actual decoration of the can may be evaluated and even calculated when deformation printing techniques are utilised. This paper presents some of the technical details relating to the inverse approach employed in Stampack to carry out simulations important for the manufacture of food cans that are shown via industrial.

Idioma original	Inglés
Título de la publicación alojada	NUMISHEET 2005
Subtítulo de la publicación alojada	Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes
Editorial	American Institute of Physics Inc.
Páginas	731-738
Número de páginas	8
ISBN (versión impresa)	0735402655, 9780735402652
DOI	https://doi.org/10.1063/1.2011309
Estado	Publicada - 5 ago 2005
Publicado de forma externa	Sí
Evento	NUMISHEET 2005: 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes - Detroit, MI, Estados Unidos Duración: 15 ago 2005 → 19 ago 2005

Serie de la publicación

Nombre	AIP Conference Proceedings
Volumen	778 A
ISSN (versión impresa)	0094-243X
ISSN (versión digital)	1551-7616

Conferencia

Conferencia	NUMISHEET 2005: 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes
País/Territorio	Estados Unidos
Ciudad	Detroit, MI
Período	15/08/05 → 19/08/05

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

ODS 9: Industria, innovación e infraestructura

Acceder al documento

10.1063/1.2011309

Otros archivos y enlaces

Enlace a la publicación en Scopus

Cómo citar

Duffett, G. A., Forgas, A., Neamtu, L., Naceur, H., Batoz, J. L., & Guo, Y. Q. (2005). Use of the inverse approach for the manufacture and decoration of food cans. En NUMISHEET 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (pp. 731-738). (AIP Conference Proceedings; Vol. 778 A). American Institute of Physics Inc.. https://doi.org/10.1063/1.2011309

@inproceedings{0f1cf38f99d744038e70d0d08a21ba54,

title = "Use of the inverse approach for the manufacture and decoration of food cans",

abstract = "Innovation is a key objective in the metal packaging industry in order to produce new concepts, designs, shapes and printing. Simulation technology now allows both the can design as well as the manufacturing process to be carefully analysed before any physical prototypes or dies have been manufactured. These simulations are traditionally carried out using incremental simulation methodologies. However, much information may also be attained by using the inverse approach: the initial blank format for the can body as well as its lid may be optimised much faster, the actual decoration of the can may be evaluated and even calculated when deformation printing techniques are utilised. This paper presents some of the technical details relating to the inverse approach employed in Stampack to carry out simulations important for the manufacture of food cans that are shown via industrial.",

author = "Duffett, \{G. A.\} and A. Forgas and L. Neamtu and H. Naceur and Batoz, \{J. L.\} and Guo, \{Y. Q.\}",

year = "2005",

month = aug,

day = "5",

doi = "10.1063/1.2011309",

language = "English",

isbn = "0735402655",

series = "AIP Conference Proceedings",

publisher = "American Institute of Physics Inc.",

pages = "731--738",

booktitle = "NUMISHEET 2005",

note = "NUMISHEET 2005: 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes ; Conference date: 15-08-2005 Through 19-08-2005",

}

Duffett, GA, Forgas, A, Neamtu, L, Naceur, H, Batoz, JL & Guo, YQ 2005, Use of the inverse approach for the manufacture and decoration of food cans. En NUMISHEET 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. AIP Conference Proceedings, vol. 778 A, American Institute of Physics Inc., pp. 731-738, NUMISHEET 2005: 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Detroit, MI, Estados Unidos, 15/08/05. https://doi.org/10.1063/1.2011309

Use of the inverse approach for the manufacture and decoration of food cans. / Duffett, G. A.; Forgas, A.; Neamtu, L. et al.
NUMISHEET 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. American Institute of Physics Inc., 2005. p. 731-738 (AIP Conference Proceedings; Vol. 778 A).

Producción científica: Capítulo del libro › Contribución a congreso/conferencia › revisión exhaustiva

TY - GEN

T1 - Use of the inverse approach for the manufacture and decoration of food cans

AU - Duffett, G. A.

AU - Forgas, A.

AU - Neamtu, L.

AU - Naceur, H.

AU - Batoz, J. L.

AU - Guo, Y. Q.

PY - 2005/8/5

Y1 - 2005/8/5

N2 - Innovation is a key objective in the metal packaging industry in order to produce new concepts, designs, shapes and printing. Simulation technology now allows both the can design as well as the manufacturing process to be carefully analysed before any physical prototypes or dies have been manufactured. These simulations are traditionally carried out using incremental simulation methodologies. However, much information may also be attained by using the inverse approach: the initial blank format for the can body as well as its lid may be optimised much faster, the actual decoration of the can may be evaluated and even calculated when deformation printing techniques are utilised. This paper presents some of the technical details relating to the inverse approach employed in Stampack to carry out simulations important for the manufacture of food cans that are shown via industrial.

AB - Innovation is a key objective in the metal packaging industry in order to produce new concepts, designs, shapes and printing. Simulation technology now allows both the can design as well as the manufacturing process to be carefully analysed before any physical prototypes or dies have been manufactured. These simulations are traditionally carried out using incremental simulation methodologies. However, much information may also be attained by using the inverse approach: the initial blank format for the can body as well as its lid may be optimised much faster, the actual decoration of the can may be evaluated and even calculated when deformation printing techniques are utilised. This paper presents some of the technical details relating to the inverse approach employed in Stampack to carry out simulations important for the manufacture of food cans that are shown via industrial.

UR - https://www.scopus.com/pages/publications/33749551280

U2 - 10.1063/1.2011309

DO - 10.1063/1.2011309

M3 - Conference contribution

AN - SCOPUS:33749551280

SN - 0735402655

SN - 9780735402652

T3 - AIP Conference Proceedings

SP - 731

EP - 738

BT - NUMISHEET 2005

PB - American Institute of Physics Inc.

T2 - NUMISHEET 2005: 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes

Y2 - 15 August 2005 through 19 August 2005

ER -

Duffett GA, Forgas A, Neamtu L, Naceur H, Batoz JL, Guo YQ. Use of the inverse approach for the manufacture and decoration of food cans. En NUMISHEET 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. American Institute of Physics Inc. 2005. p. 731-738. (AIP Conference Proceedings). doi: 10.1063/1.2011309

Use of the inverse approach for the manufacture and decoration of food cans

Resumen

Serie de la publicación

Conferencia

ODS de las Naciones Unidas

Acceder al documento

Otros archivos y enlaces

Huella

Cómo citar