Flexural properties and failure mechanism assessment for additive manufactured lom bars on different building orientations

D. Olivier, J. A. Travieso, S. Borrós, G. Reyes

Producción científica: Contribución a una conferenciaContribuciónrevisión exhaustiva

1 Cita (Scopus)

Resumen

Plastic Laminated Object Manufacturing has not been assessed from the flexural properties point of view. The deflection range in parts manufactured by this technique is wider than in parts fabricated by other additive manufacturing methods like SLS or FDM. This fact has increased the interest on the final application of these parts rather than restricted to Rapid Prototyping applications. In this study it will be compared the impact of building orientation and geometric features of parts over the flexural properties. Through optical observation it will be studied the failure mechanism.

Idioma originalInglés
EstadoPublicada - 2011
EventoEUROTEC 2011 Conference, in Conjunction with EQUIPLAST - Barcelona, Espana
Duración: 14 nov 201115 nov 2011

Conferencia

ConferenciaEUROTEC 2011 Conference, in Conjunction with EQUIPLAST
País/TerritorioEspana
CiudadBarcelona
Período14/11/1115/11/11

Huella

Profundice en los temas de investigación de 'Flexural properties and failure mechanism assessment for additive manufactured lom bars on different building orientations'. En conjunto forman una huella única.

Citar esto