Use of the inverse approach for the manufacture and decoration of food cans

G. A. Duffett; A. Forgas; L. Neamtu; H. Naceur; J. L. Batoz; Y. Q. Guo

doi:10.1063/1.2011309

Use of the inverse approach for the manufacture and decoration of food cans

G. A. Duffett^*
, A. Forgas
, L. Neamtu
, H. Naceur
, J. L. Batoz
, Y. Q. Guo

^*Corresponding author for this work

Research output: Book chapter › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

Innovation is a key objective in the metal packaging industry in order to produce new concepts, designs, shapes and printing. Simulation technology now allows both the can design as well as the manufacturing process to be carefully analysed before any physical prototypes or dies have been manufactured. These simulations are traditionally carried out using incremental simulation methodologies. However, much information may also be attained by using the inverse approach: the initial blank format for the can body as well as its lid may be optimised much faster, the actual decoration of the can may be evaluated and even calculated when deformation printing techniques are utilised. This paper presents some of the technical details relating to the inverse approach employed in Stampack to carry out simulations important for the manufacture of food cans that are shown via industrial.

Original language	English
Title of host publication	NUMISHEET 2005
Subtitle of host publication	Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes
Publisher	American Institute of Physics Inc.
Pages	731-738
Number of pages	8
ISBN (Print)	0735402655, 9780735402652
DOIs	https://doi.org/10.1063/1.2011309
Publication status	Published - 5 Aug 2005
Externally published	Yes
Event	NUMISHEET 2005: 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes - Detroit, MI, United States Duration: 15 Aug 2005 → 19 Aug 2005

Publication series

Name	AIP Conference Proceedings
Volume	778 A
ISSN (Print)	0094-243X
ISSN (Electronic)	1551-7616

Conference

Conference	NUMISHEET 2005: 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes
Country/Territory	United States
City	Detroit, MI
Period	15/08/05 → 19/08/05

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Access to Document

10.1063/1.2011309

Cite this

Duffett, G. A., Forgas, A., Neamtu, L., Naceur, H., Batoz, J. L., & Guo, Y. Q. (2005). Use of the inverse approach for the manufacture and decoration of food cans. In NUMISHEET 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (pp. 731-738). (AIP Conference Proceedings; Vol. 778 A). American Institute of Physics Inc.. https://doi.org/10.1063/1.2011309

@inproceedings{0f1cf38f99d744038e70d0d08a21ba54,

title = "Use of the inverse approach for the manufacture and decoration of food cans",

abstract = "Innovation is a key objective in the metal packaging industry in order to produce new concepts, designs, shapes and printing. Simulation technology now allows both the can design as well as the manufacturing process to be carefully analysed before any physical prototypes or dies have been manufactured. These simulations are traditionally carried out using incremental simulation methodologies. However, much information may also be attained by using the inverse approach: the initial blank format for the can body as well as its lid may be optimised much faster, the actual decoration of the can may be evaluated and even calculated when deformation printing techniques are utilised. This paper presents some of the technical details relating to the inverse approach employed in Stampack to carry out simulations important for the manufacture of food cans that are shown via industrial.",

author = "Duffett, \{G. A.\} and A. Forgas and L. Neamtu and H. Naceur and Batoz, \{J. L.\} and Guo, \{Y. Q.\}",

year = "2005",

month = aug,

day = "5",

doi = "10.1063/1.2011309",

language = "English",

isbn = "0735402655",

series = "AIP Conference Proceedings",

publisher = "American Institute of Physics Inc.",

pages = "731--738",

booktitle = "NUMISHEET 2005",

note = "NUMISHEET 2005: 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes ; Conference date: 15-08-2005 Through 19-08-2005",

}

Duffett, GA, Forgas, A, Neamtu, L, Naceur, H, Batoz, JL & Guo, YQ 2005, Use of the inverse approach for the manufacture and decoration of food cans. in NUMISHEET 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. AIP Conference Proceedings, vol. 778 A, American Institute of Physics Inc., pp. 731-738, NUMISHEET 2005: 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Detroit, MI, United States, 15/08/05. https://doi.org/10.1063/1.2011309

Use of the inverse approach for the manufacture and decoration of food cans. / Duffett, G. A.; Forgas, A.; Neamtu, L. et al.
NUMISHEET 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. American Institute of Physics Inc., 2005. p. 731-738 (AIP Conference Proceedings; Vol. 778 A).

Research output: Book chapter › Conference contribution › peer-review

TY - GEN

T1 - Use of the inverse approach for the manufacture and decoration of food cans

AU - Duffett, G. A.

AU - Forgas, A.

AU - Neamtu, L.

AU - Naceur, H.

AU - Batoz, J. L.

AU - Guo, Y. Q.

PY - 2005/8/5

Y1 - 2005/8/5

N2 - Innovation is a key objective in the metal packaging industry in order to produce new concepts, designs, shapes and printing. Simulation technology now allows both the can design as well as the manufacturing process to be carefully analysed before any physical prototypes or dies have been manufactured. These simulations are traditionally carried out using incremental simulation methodologies. However, much information may also be attained by using the inverse approach: the initial blank format for the can body as well as its lid may be optimised much faster, the actual decoration of the can may be evaluated and even calculated when deformation printing techniques are utilised. This paper presents some of the technical details relating to the inverse approach employed in Stampack to carry out simulations important for the manufacture of food cans that are shown via industrial.

AB - Innovation is a key objective in the metal packaging industry in order to produce new concepts, designs, shapes and printing. Simulation technology now allows both the can design as well as the manufacturing process to be carefully analysed before any physical prototypes or dies have been manufactured. These simulations are traditionally carried out using incremental simulation methodologies. However, much information may also be attained by using the inverse approach: the initial blank format for the can body as well as its lid may be optimised much faster, the actual decoration of the can may be evaluated and even calculated when deformation printing techniques are utilised. This paper presents some of the technical details relating to the inverse approach employed in Stampack to carry out simulations important for the manufacture of food cans that are shown via industrial.

UR - https://www.scopus.com/pages/publications/33749551280

U2 - 10.1063/1.2011309

DO - 10.1063/1.2011309

M3 - Conference contribution

AN - SCOPUS:33749551280

SN - 0735402655

SN - 9780735402652

T3 - AIP Conference Proceedings

SP - 731

EP - 738

BT - NUMISHEET 2005

PB - American Institute of Physics Inc.

T2 - NUMISHEET 2005: 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes

Y2 - 15 August 2005 through 19 August 2005

ER -

Duffett GA, Forgas A, Neamtu L, Naceur H, Batoz JL, Guo YQ. Use of the inverse approach for the manufacture and decoration of food cans. In NUMISHEET 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. American Institute of Physics Inc. 2005. p. 731-738. (AIP Conference Proceedings). doi: 10.1063/1.2011309

Use of the inverse approach for the manufacture and decoration of food cans

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this