Flexural properties and failure mechanism assessment for additive manufactured lom bars on different building orientations

D. Olivier*, J. A. Travieso, S. Borrós, G. Reyes

*Autor corresponent d’aquest treball

Producció científica: Contribució a una conferènciaContribucióAvaluat per experts

1 Citació (Scopus)

Resum

Plastic Laminated Object Manufacturing has not been assessed from the flexural properties point of view. The deflection range in parts manufactured by this technique is wider than in parts fabricated by other additive manufacturing methods like SLS or FDM. This fact has increased the interest on the final application of these parts rather than restricted to Rapid Prototyping applications. In this study it will be compared the impact of building orientation and geometric features of parts over the flexural properties. Through optical observation it will be studied the failure mechanism.

Idioma originalAnglès
Estat de la publicacióPublicada - 2011
EsdevenimentEUROTEC 2011 Conference, in Conjunction with EQUIPLAST - Barcelona, Spain
Durada: 14 de nov. 201115 de nov. 2011

Conferència

ConferènciaEUROTEC 2011 Conference, in Conjunction with EQUIPLAST
País/TerritoriSpain
CiutatBarcelona
Període14/11/1115/11/11

Fingerprint

Navegar pels temes de recerca de 'Flexural properties and failure mechanism assessment for additive manufactured lom bars on different building orientations'. Junts formen un fingerprint únic.

Com citar-ho