CO2 reduction using non-thermal plasma generated with photovoltaic energy in a fluidized reactor

Producció científica: Article en revista indexadaArticleAvaluat per experts

20 Cites (Scopus)

Resum

The aim of this work was to study the efficiency of a fluidized plasma reactor (FPR) coupled to a photovoltaic system to reduce CO2 to CO at atmospheric pressure and low temperatures. The major products of this reaction were CO and O2, which suggests that the stoichiometric conversion of CO2 into CO and O2 was achieved. The results indicate that increasing the number of discharge points in the anode, voltage and frequency, the conversion of CO2 to CO increased due to the a higher number of random non-thermal plasma (NTP) discharges generated in the FPR. An increase of the gap between the electrodes resulted also in higher conversions. At higher CO2 flowrate, the CO2 conversion decreased but the energy efficiency increased. The addition of low concentration of copper in the alumina fluidized bed resulted in a slight improvement of the CO2 conversion and energy efficiency. The maximum CO2 conversion and energy efficiency obtained in this study were 41% and 2.1% respectively. From a life cycle assessment approach, it was concluded that the use of photovoltaic energy coupled to the FPR technology improve the sustainability of the process. It was estimated that with the optimal conditions obtained in this work, it would be possible to compensate 67% of the CO2 emissions associated to the process.

Idioma originalAnglès
Pàgines (de-a)528-535
Nombre de pàgines8
RevistaJournal of CO2 Utilization
Volum27
DOIs
Estat de la publicacióPublicada - d’oct. 2018

Fingerprint

Navegar pels temes de recerca de 'CO2 reduction using non-thermal plasma generated with photovoltaic energy in a fluidized reactor'. Junts formen un fingerprint únic.

Com citar-ho