Circuital Characterization of an Electronic Equipment for Narrow-Band Conducted Emissions

A. Pérez; J. R. Regué; M. Ribó; A. M. Sánchez; F. J. Pajares; D. Badia

doi:10.23919/EMC.2006.10813046

Circuital Characterization of an Electronic Equipment for Narrow-Band Conducted Emissions

A. Pérez, J. R. Regué, M. Ribó, A. M. Sánchez, F. J. Pajares, D. Badia

Producció científica: Capítol de llibre › Contribució a congrés/conferència › Avaluat per experts

2 Cites (Scopus)

Resum

In this paper, a new network analyzer-based procedure is presented in order to find the equivalent circuit for conducted interference generation of an electronic equipment when it is connected to the power line. The equivalent circuit is composed by three impedances and two voltage sources, which model the conducted interference that the electronic device injects to the power line. An accurate model of the interference generation process is very necessary in order to design or choose a suitable power line filter, or to predict the levels of conducted EMI as a function of the impedance presented by the power line. The new procedure is experimentally tested using real measurements.

Idioma original	Anglès
Títol de la publicació	EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility
Editors	Ferran Silva, Mireya Fernandez, Miquel Ribo, Joan R. Regue
Editor	Institute of Electrical and Electronics Engineers Inc.
ISBN (electrònic)	8468994383, 9788468994383
DOIs	https://doi.org/10.23919/EMC.2006.10813046
Estat de la publicació	Publicada - 2006
Publicat externament	Sí
Esdeveniment	7th International Symposium on Electromagnetic Compatibility, EMC Europe 2006 Barcelona - Barcelona, Spain Durada: 4 de set. 2006 → 8 de set. 2006

Sèrie de publicacions

Nom	EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility

Conferència

Conferència	7th International Symposium on Electromagnetic Compatibility, EMC Europe 2006 Barcelona
País/Territori	Spain
Ciutat	Barcelona
Període	4/09/06 → 8/09/06

SDG de les Nacions Unides

Aquest resultat contribueix als següents objectius de desenvolupament sostenible.

Accés al document

10.23919/EMC.2006.10813046

Altres arxius i enllaços

Enllaç a la publicació de Scopus

Com citar-ho

Pérez, A., Regué, J. R., Ribó, M., Sánchez, A. M., Pajares, F. J., & Badia, D. (2006). Circuital Characterization of an Electronic Equipment for Narrow-Band Conducted Emissions. In F. Silva, M. Fernandez, M. Ribo, & J. R. Regue (Ed.), EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility (EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.23919/EMC.2006.10813046

Pérez, A. ; Regué, J. R. ; Ribó, M. et al. / Circuital Characterization of an Electronic Equipment for Narrow-Band Conducted Emissions. EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility. editor / Ferran Silva ; Mireya Fernandez ; Miquel Ribo ; Joan R. Regue. Institute of Electrical and Electronics Engineers Inc., 2006. (EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility).

@inproceedings{e24ce58d4f38450c95f880a8623f513a,

title = "Circuital Characterization of an Electronic Equipment for Narrow-Band Conducted Emissions",

abstract = "In this paper, a new network analyzer-based procedure is presented in order to find the equivalent circuit for conducted interference generation of an electronic equipment when it is connected to the power line. The equivalent circuit is composed by three impedances and two voltage sources, which model the conducted interference that the electronic device injects to the power line. An accurate model of the interference generation process is very necessary in order to design or choose a suitable power line filter, or to predict the levels of conducted EMI as a function of the impedance presented by the power line. The new procedure is experimentally tested using real measurements.",

author = "A. P{\'e}rez and Regu{\'e}, {J. R.} and M. Rib{\'o} and S{\'a}nchez, {A. M.} and Pajares, {F. J.} and D. Badia",

note = "Publisher Copyright: {\textcopyright} 2006 EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility All rights reserved.; 7th International Symposium on Electromagnetic Compatibility, EMC Europe 2006 Barcelona ; Conference date: 04-09-2006 Through 08-09-2006",

year = "2006",

doi = "10.23919/EMC.2006.10813046",

language = "English",

series = "EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

editor = "Ferran Silva and Mireya Fernandez and Miquel Ribo and Regue, {Joan R.}",

booktitle = "EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility",

address = "United States",

}

Pérez, A, Regué, JR, Ribó, M, Sánchez, AM, Pajares, FJ & Badia, D 2006, Circuital Characterization of an Electronic Equipment for Narrow-Band Conducted Emissions. in F Silva, M Fernandez, M Ribo & JR Regue (ed.), EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility. EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility, Institute of Electrical and Electronics Engineers Inc., 7th International Symposium on Electromagnetic Compatibility, EMC Europe 2006 Barcelona, Barcelona, Spain, 4/09/06. https://doi.org/10.23919/EMC.2006.10813046

Circuital Characterization of an Electronic Equipment for Narrow-Band Conducted Emissions. / Pérez, A.; Regué, J. R.; Ribó, M. et al.
EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility. ed. / Ferran Silva; Mireya Fernandez; Miquel Ribo; Joan R. Regue. Institute of Electrical and Electronics Engineers Inc., 2006. (EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility).

Producció científica: Capítol de llibre › Contribució a congrés/conferència › Avaluat per experts

TY - GEN

T1 - Circuital Characterization of an Electronic Equipment for Narrow-Band Conducted Emissions

AU - Pérez, A.

AU - Regué, J. R.

AU - Ribó, M.

AU - Sánchez, A. M.

AU - Pajares, F. J.

AU - Badia, D.

PY - 2006

Y1 - 2006

N2 - In this paper, a new network analyzer-based procedure is presented in order to find the equivalent circuit for conducted interference generation of an electronic equipment when it is connected to the power line. The equivalent circuit is composed by three impedances and two voltage sources, which model the conducted interference that the electronic device injects to the power line. An accurate model of the interference generation process is very necessary in order to design or choose a suitable power line filter, or to predict the levels of conducted EMI as a function of the impedance presented by the power line. The new procedure is experimentally tested using real measurements.

AB - In this paper, a new network analyzer-based procedure is presented in order to find the equivalent circuit for conducted interference generation of an electronic equipment when it is connected to the power line. The equivalent circuit is composed by three impedances and two voltage sources, which model the conducted interference that the electronic device injects to the power line. An accurate model of the interference generation process is very necessary in order to design or choose a suitable power line filter, or to predict the levels of conducted EMI as a function of the impedance presented by the power line. The new procedure is experimentally tested using real measurements.

UR - http://www.scopus.com/inward/record.url?scp=86000230382&partnerID=8YFLogxK

U2 - 10.23919/EMC.2006.10813046

DO - 10.23919/EMC.2006.10813046

M3 - Conference contribution

AN - SCOPUS:86000230382

T3 - EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility

BT - EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility

A2 - Silva, Ferran

A2 - Fernandez, Mireya

A2 - Ribo, Miquel

A2 - Regue, Joan R.

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 7th International Symposium on Electromagnetic Compatibility, EMC Europe 2006 Barcelona

Y2 - 4 September 2006 through 8 September 2006

ER -

Pérez A, Regué JR, Ribó M, Sánchez AM, Pajares FJ, Badia D. Circuital Characterization of an Electronic Equipment for Narrow-Band Conducted Emissions. In Silva F, Fernandez M, Ribo M, Regue JR, editors, EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility. Institute of Electrical and Electronics Engineers Inc. 2006. (EMC Europe 2006 Barcelona, International Symposium on Electromagnetic Compatibility). doi: 10.23919/EMC.2006.10813046

Circuital Characterization of an Electronic Equipment for Narrow-Band Conducted Emissions

Resum

Sèrie de publicacions

Conferència

SDG de les Nacions Unides

Accés al document

Altres arxius i enllaços

Fingerprint

Com citar-ho