TY - JOUR
T1 - A statistical analysis of nanocavities replication applied to injection moulding
AU - Pina-Estany, J.
AU - Colominas, C.
AU - Fraxedas, J.
AU - Llobet, J.
AU - Perez-Murano, F.
AU - Puigoriol-Forcada, J. M.
AU - Ruso, D.
AU - Garcia-Granada, A. A.
N1 - Funding Information:
This work has been performed within the aim4np project (Automated in-line Metrology for Nanoscale Production), which is supported by the EC through a grant (contract Nr. 309558) within the Seventh Framework Programme NMPCall 2012.1.4-3 on Nanoscale mechanical metrology for industrial processes and products. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295.
Publisher Copyright:
© 2016 Elsevier Ltd
PY - 2017/2/1
Y1 - 2017/2/1
N2 - The purpose of this paper is to investigate both theoretically and experimentally how nanocavities are replicated in the injection moulding manufacturing process. The objective is to obtain a methodology for efficiently replicate nanocavities. From the theoretical point of view, simulations are carried out using a submodeling approach combining Solidworks Plastics for a first macrosimulation and Fluent solver for a subsequent nanosimulation. The effect of the four main factors (melt temperature, mould temperature, filling time and cavity geometry) are quantified using an statistical 24 factorial experiment. It is found that the main effects are the cavity length, the mould temperature and the polymer temperature, with standardized effects of 5, 3 and 2.6, respectively. Filling time has a negative 1.3 standardized effect. From the experimental point of view, Focused Ion Beam technique is used for mechanizing nanocavities in a steel mould. The replication achieved in polycarbonate injection is quantified using an Atomic Force Microscope. It is observed how both the geometry and the position of the cavities in the mould affect its replication.
AB - The purpose of this paper is to investigate both theoretically and experimentally how nanocavities are replicated in the injection moulding manufacturing process. The objective is to obtain a methodology for efficiently replicate nanocavities. From the theoretical point of view, simulations are carried out using a submodeling approach combining Solidworks Plastics for a first macrosimulation and Fluent solver for a subsequent nanosimulation. The effect of the four main factors (melt temperature, mould temperature, filling time and cavity geometry) are quantified using an statistical 24 factorial experiment. It is found that the main effects are the cavity length, the mould temperature and the polymer temperature, with standardized effects of 5, 3 and 2.6, respectively. Filling time has a negative 1.3 standardized effect. From the experimental point of view, Focused Ion Beam technique is used for mechanizing nanocavities in a steel mould. The replication achieved in polycarbonate injection is quantified using an Atomic Force Microscope. It is observed how both the geometry and the position of the cavities in the mould affect its replication.
KW - AFM
KW - CFD
KW - Heat transfer
KW - Injection moulding
KW - Nanoscale simulation
KW - Submodeling
UR - http://www.scopus.com/inward/record.url?scp=85007304477&partnerID=8YFLogxK
UR - https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=pure_univeritat_ramon_llull&SrcAuth=WosAPI&KeyUT=WOS:000397359200016&DestLinkType=FullRecord&DestApp=WOS
U2 - 10.1016/j.icheatmasstransfer.2016.11.003
DO - 10.1016/j.icheatmasstransfer.2016.11.003
M3 - Article
AN - SCOPUS:85007304477
SN - 0735-1933
VL - 81
SP - 131
EP - 140
JO - International Communications in Heat and Mass Transfer
JF - International Communications in Heat and Mass Transfer
ER -