A new procedure based on Sachs' boring for measuring non-axisymmetric residual stresses: Experimental application

A. A. Garcia-Granada; V. D. Lacarac; D. J. Smith; M. J. Pavier

doi:10.1016/S0020-7403(01)00071-6

A new procedure based on Sachs' boring for measuring non-axisymmetric residual stresses: Experimental application

A. A. Garcia-Granada, V. D. Lacarac, D. J. Smith, M. J. Pavier

Producció científica: Article en revista indexada › Article › Avaluat per experts

18 Cites (Scopus)

Resum

A new procedure has been developed based on Sachs' boring to measure non-axisymmetric residual stresses in cylindrical components. The new procedure uses a Fourier series to represent the residual stresses. This paper describes an experimental application of the procedure to measure the residual stresses around a hole in a specimen subjected to a uniaxial overload. Good agreement is found between the measured residual stresses and those predicted using a finite element simulation.

Idioma original	Anglès
Pàgines (de-a)	2753-2768
Nombre de pàgines	16
Revista	International Journal of Mechanical Sciences
Volum	43
Número	12
DOIs	https://doi.org/10.1016/S0020-7403(01)00071-6
Estat de la publicació	Publicada - de des. 2001
Publicat externament	Sí

Accés al document

10.1016/S0020-7403(01)00071-6

Altres arxius i enllaços

Link to publication in Scopus

Com citar-ho

@article{3696e30df4b14451913c96cbdab180e7,

title = "A new procedure based on Sachs' boring for measuring non-axisymmetric residual stresses: Experimental application",

abstract = "A new procedure has been developed based on Sachs' boring to measure non-axisymmetric residual stresses in cylindrical components. The new procedure uses a Fourier series to represent the residual stresses. This paper describes an experimental application of the procedure to measure the residual stresses around a hole in a specimen subjected to a uniaxial overload. Good agreement is found between the measured residual stresses and those predicted using a finite element simulation.",

keywords = "Fourier analysis, Residual stress, Sachs' boring",

author = "Garcia-Granada, {A. A.} and Lacarac, {V. D.} and Smith, {D. J.} and Pavier, {M. J.}",

note = "Funding Information: The work described here is part of a CARAD project sponsored by DTi and managed by DERA. Their financial support and assistance is gratefully acknowledged. ",

year = "2001",

month = dec,

doi = "10.1016/S0020-7403(01)00071-6",

language = "English",

volume = "43",

pages = "2753--2768",

journal = "International Journal of Mechanical Sciences",

issn = "0020-7403",

publisher = "Elsevier Ltd.",

number = "12",

}

TY - JOUR

T1 - A new procedure based on Sachs' boring for measuring non-axisymmetric residual stresses

T2 - Experimental application

AU - Garcia-Granada, A. A.

AU - Lacarac, V. D.

AU - Smith, D. J.

AU - Pavier, M. J.

N1 - Funding Information: The work described here is part of a CARAD project sponsored by DTi and managed by DERA. Their financial support and assistance is gratefully acknowledged.

PY - 2001/12

Y1 - 2001/12

N2 - A new procedure has been developed based on Sachs' boring to measure non-axisymmetric residual stresses in cylindrical components. The new procedure uses a Fourier series to represent the residual stresses. This paper describes an experimental application of the procedure to measure the residual stresses around a hole in a specimen subjected to a uniaxial overload. Good agreement is found between the measured residual stresses and those predicted using a finite element simulation.

AB - A new procedure has been developed based on Sachs' boring to measure non-axisymmetric residual stresses in cylindrical components. The new procedure uses a Fourier series to represent the residual stresses. This paper describes an experimental application of the procedure to measure the residual stresses around a hole in a specimen subjected to a uniaxial overload. Good agreement is found between the measured residual stresses and those predicted using a finite element simulation.

KW - Fourier analysis

KW - Residual stress

KW - Sachs' boring

UR - http://www.scopus.com/inward/record.url?scp=0035545896&partnerID=8YFLogxK

U2 - 10.1016/S0020-7403(01)00071-6

DO - 10.1016/S0020-7403(01)00071-6

M3 - Article

AN - SCOPUS:0035545896

SN - 0020-7403

VL - 43

SP - 2753

EP - 2768

JO - International Journal of Mechanical Sciences

JF - International Journal of Mechanical Sciences

IS - 12

ER -

A new procedure based on Sachs' boring for measuring non-axisymmetric residual stresses: Experimental application

Resum

Accés al document

Altres arxius i enllaços

Fingerprint

Com citar-ho